IDLE SPEED CHECK PROCEDURES
NOTE
Before adjusting, check that the spark plugs, injectors, idle speed control actuator ISC actuator, compression etc. are normal.
Checking conditions;
-
Engine coolant temperature is 80 to 95°C (176 to 205°F).
-
Lights, electric cooling fan and all accessories are off.
-
Transaxle is in neutral ["P" or N" range for NT vehicles].
-
Steering wheel is in straight forward position (Vehicles with power steering).
-
Connect the GST (Generic Scan Tool) to the data link connector at lower crash pad.
-
Start and run the engine at curb idle speed.
-
Run the engine for more than 5 seconds at an engine speed of 2,000 to 3,000 rpm.
-
Run the engine at idle for 2 minutes.
-
Read the idling rpm.
Idle speed: 800 ± 100 rpm