SERVICE MANUAL
  Applies to: Hyundai Coupe/Tiburon 1998-2001
GROUP
Brake Systems Parking Brake System
Return to Main Menu(s):      Mechanical Manual      Electrical Manual

REMOVAL 
  1. Remove the console upper cover.

  1. Remove the crash pad center facia panel.

  1. Remove the console assembly.

  1. Remove the parking cable adjusting nut.

  1. Detach the parking brake switch assembly.

  1. Remove the parking brake lever assembly.

  1. Remove the wheel and tire.

  1. Remove the brake drum.

  1. Remove the brake shoes as outlined before.

  1. Detach the parking brake cable from the brake shoe.

  1. Remove the parking cable retaining ring in the rear of the backing plate.

  1. Remove the rear seat cushion assembly and roll up the carpet.

  1. Loosen the parking brake cable clamp and remove the parking brake cable assembly.

Return to Main Menu(s):      Mechanical Manual      Electrical Manual

COMPONENTS 
Return to Main Menu(s):      Mechanical Manual      Electrical Manual

INSPECTION 
  1. Check the parking brake switch operation.

  1. Check the parking brake lever ratchet for wear.

  1. Check the parking brake cable for fraying or damage.

Return to Main Menu(s):      Mechanical Manual      Electrical Manual

INSTALLATION 
  1. Check the parking brake cables for left and right identification marks and install accordingly.

  1. Move the adjuster lever all the way back when installing the shoe-to-shoe spring.

  1. Install the grommets in the direction shown in the illustration.

  1. Apply a coating of the specified grease to the sliding pads of the ratchet plate and ratchet pawl.

    Specified grease: Multipurpose grease SAE J310, NLGI No. 2

  1. After installing the cable adjuster, adjust the parking brake lever stroke.