SERVICE MANUAL
Applies to:
Hyundai Coupe/Tiburon
1998-2001
GROUP
Suspension System
Rear Suspension System
Return to Main Menu(s):
Mechanical Manual
Electrical Manual
REMOVAL
Remove the stabilizer link mounting nuts.
Remove the stabilizer bar brackets and bushing.
Remove the stabilizer bar.
Return to Main Menu(s):
Mechanical Manual
Electrical Manual
INSPECTION
Check the bushing for wear and deterioration.
Check the stabilizer bar for deterioration or damage.
Check the stabilizer link ball joint dust cover for crack.
Check all bolts for condition and straightness.
CHECKING OF STABILIZER LINK BALL JOINT FOR STARTING TORQUE
With the special tool measure the ball joint continuous rotating torque.
TORQUE SPECIFICATION
Standard value
0.3-1
Nm
(
3-10
kg·cm
,
2.7-8.8
lb·ft
)
Return to Main Menu(s):
Mechanical Manual
Electrical Manual
BALL JOINT DUST COVER REPLACEMENT
Remove the clip ring and the dust cover.
Apply multipurpose grease to the lip and inside of the dust cover.
Use vinyl tape to tape the stabilizer link as shown in the illustration. Install the dust cover to the stabilizer link.
Secure the dust cover by the clip ring.
Return to Main Menu(s):
Mechanical Manual
Electrical Manual
COMPONENTS