SERVICE MANUAL
  Applies to: Hyundai Coupe/Tiburon 1998-2001
GROUP
Body Electrical System Power Door Locks
Return to Main Menu(s):      Mechanical Manual      Electrical Manual

COMPONENTS 
Return to Main Menu(s):      Mechanical Manual      Electrical Manual

CIRCUIT DIAGRAM 
Return to Main Menu(s):      Mechanical Manual      Electrical Manual

INSPECTION OF COMPONENTS 
Door lock control actuator
  1. Disconnect the actuator connector from the wiring harness.

  1. Apply battery voltage (DC 12 V) to each terminal as shown in the table and confirm that the actuator makes corresponding operation.

Door lock control module
  1. Remove the door lock control module.

  1. Check for continuity between the terminals. If continuity is not as specified, replace the door lock control module.