| SERVICE MANUAL | |
| Applies to: Hyundai Coupe/Tiburon 1998-2000 | |
| GROUP | |
| Drive Shaft & Axle | General |
| SERVICE MANUAL | |
| Applies to: Hyundai Coupe/Tiburon 1998-2000 | |
| GROUP | |
| Drive Shaft & Axle | General |
|
Tool (Number and Name)
|
Illustration
|
Use
|
|
09500-21000 Bar |
|
Removal of front wheel bearing. |
|
09517-21000 Hub bearing remover |
|
Removal of front wheel bearing. (Use with 09500-21000.) |
|
09216-21300 Hub bearing installer |
|
Installation of front wheel bearing. |
|
09495-33000 Puller |
|
Removal of the front wheel bearing inner race. |
|
09517-21500 Front hub remover and installer |
|
Removal & installation of the front hub. (Use with 09517-29000.) |
|
09517-29000 Knuckle arm bridge |
|
Removal of the front hub. (Use with 09517-21500.) |
|
09532-11600 Pre-load socket |
|
Measuring of front wheel bearing preload. (Use with 09517-21500, 30 mm socket and torque wrench.) |
|
09526-11001 Axle shaft puller |
|
Removal of the drive shaft from the front hub. |
|
09568-34000 Ball joint remover |
|
Removal of the front lower arm ball joint and tie rod end ball joint. |