SERVICE MANUAL | |
Applies to: Hyundai Coupe/Tiburon 1998-2001 | |
GROUP | |
Clutch System | Clutch Components |
Check the oil leakage in engine rear bearing oil seal and transaxle front oil seal. If leaky, repair them.
If any part is excessive wear at the point of contact, the pressure plate is installed badly.
Replace the clutch disc, if the facing is stained with oil or grease. Measure the rivet sink and replace the clutch disc, if it is less than 3mm.
MEASUREMENT SPECIFICATION | |
Clutch disc | 0.3 mm ( 0.012 in ) |
Check the pressure plate surface for wear, cracks and color change.
TORQUE SPECIFICATION | |
Clutch cover bolt | 15-22 Nm ( 150-220 kg·cm, 11-16 lb·ft ) |
If the range is over 3° it is a symptom that the release bearing and clutch cover are not aligned correctly. So, push the release lever to the arrow mark one more time.