SERVICE MANUAL
  Applies to: Hyundai Coupe/Tiburon 1998-2000
GROUP
Transaxle/Transmission Automatic Transaxle System
Return to Main Menu(s):      Mechanical Manual      Electrical Manual

SPECIAL TOOLS 
Tool (Number and name)
Illustration
 Use
09400-29000 (J28467-B)
Engine support fixture
Removal and installation of transaxle assembly
09431-21200
Oil seal installer
Installation of differential oil seal
09432-33800
Bearing installer
Installation of transaxle shaft bearing and transfer shaft drive gear
09433-21000
Removing plate
  1. Removing of transfer driven gear taper bearing
  2. Removal of differential gear ball bearing
09452-21001
Oil pressure gauge adapter
Measurement of the oil pressure
(use with 09452-21500, 09452-21001)
09452-21002
Oil pressure gauge adapter
Measurement of the oil pressure
(use with 09452-21500, 09452-21001)
09452-21100
Oil pump remover
Removal of the oil pump
Tool (Number and name)
Illustration
 Use
09452-21200
Oil pump oil seal installer
Installation of pump oil seal
09452-21301
Oil pump band
Assembling the oil pump
09452-21401
Guide pin
Installation of the oil pump
09452-21500
Transmission pressure gauge
Measurement of the oil pressure
(use with 09452-21001, 09452-21002)
09452-22000
Differential bearing retainer remove
Removal of the differential bearing retainer
09453-21000
Spring compressor
  1. Installation of snap ring and front clutch (use with 09453-21100)
  2. Removal and installation of rear clutch (use with 09453-24000)
09453-21100
Spring compressor
Removal and installation of the rear clutch
(use with 09453-21000)
Tool (Number and name)
Illustration
 Use
09453-21310
Center support remover and installer
Removal and installation of the center support
09453-21400
Dial gauge support
  1. Measurement of the input shaft end play (use with a dial gauge)
  2. Measurement of the transfer shaft end play
    (use with a dial gauge)
09453-24000
Spring compressor
Installation of snap ring and front clutch
09453-29000
Piston oil seal installer guide
Installation of end clutch piston
09453-33000/09453-34000
Snap ring installer
Installation of end clutch snap ring
09453-33100
Dial gauge extension
Measurement of the low and reverse brake end play
(use with dial gauge)
09455-21100
Bearing installer
Installation of differentiai ball bearing
Tool (Number and name)
Illustration
 Use
09455-322000
Oil seal puller
Removal of transfer drive gear bearing outer race
09455-33000
Transfer drive bearing remover
Removal of transfer shaft drive gear bearing from gear
09455-33200
Bearing installer
  1. Installation of ball bearing and transfer drive gear
  2. Installation of the side bearing
09456-21000
Guide pin
Assembly of the valve body and transfer plate
09457-22000
Removing plate
Removal of the differential
09457-22100
Transfer bearing outer race installer
Installation of the transfer bearing outer race
09457-22200
Transfer gear remover bolt
Removal of transfer drive gear
(use with 09561-11001)
Tool (Number and name)
Illustration
 Use
09457-34000
Removing plate
Removal and installation of the snap ring and return spring of the front clutch
09526-11001
Transfer driven gear remover
Removal of the transaxle driven gear (use with 09457-22200
09457-29000
Transfer driven gear holder
Removal and installation of the lock nut.