| SERVICE MANUAL | |
| Applies to: Hyundai Coupe/Tiburon 1998-2000 | |
| GROUP | |
| Body Electrical System | General |
|
Items |
Specifications |
|
Dimmer & Passing switch |
High: 15 A (Lamp load) |
|
|
Low: 10 A (Lamp load) |
|
|
Passing: 15 A (Lamp load) |
|
Lighting switch |
Lighting: 0.22 ± 0.05A (Relay load) |
|
Turn signal switch |
6.6 ± 0.5A (Lamp load) |
|
Wiper switch |
Low, Hi: 4 A (Motor load) |
|
|
Int.: 0.22 ± 0.05 A (Relay load) |
|
|
Lock: Max. 23 A (Motor load) |
|
Washer switch |
4 A (Motor load) |
|
Cruise control switch |
0.2 ± 0.1A |
|
Horn switch |
7 A (Inductive load) |
|
Variable int. volume switch |
Max. 25 mA |
|
Indicator and warning lamps |
Bulb wattage (W) |
Illumination color |
|
Turn signal lamps |
1.4 |
Green |
|
Cruise |
1.4 |
Green |
|
High beam |
3.0 |
Blue |
|
ABS |
1.4 |
Amber |
|
Low fuel |
3.0 |
Amber |
|
Trunk lid open |
1.4 |
Amber |
|
Air bag |
1.4 |
Red |
|
Parking brake |
1.4 |
Red |
|
Seat belt |
1.4 |
Red |
|
Door ajar |
1.4 |
Red |
|
Battery charge |
1.4 |
Red |
|
Oil pressure |
1.4 |
Red |
|
MIL |
1.4 |
Red |
|
Speed (MPH) |
Tolerance (MPH) |
Speed (km/h) |
Tolerance (km/h) |
|
10 |
+3.0 0 |
20 |
+4.4 0 |
|
20 |
+2.0 0 |
40 |
+4.4 0 |
|
40 |
+3.0 0 |
60 |
+5.4 +1.0 |
|
60 |
+3.8 0 |
80 |
+6.5 +1.0 |
|
80 |
+4.1 +0.3 |
100 |
+7.5 +2.0 |
|
100 |
+4.1 +0.3 |
120 |
+8.5 +3.0 |
|
120 |
+4.1 +0.3 |
140 |
+9.5 +4.0 |
|
| |
| |
160 |
+10.5 +5.0 |
|
| |
| |
180 |
+11.5 +6.0 |
|
| |
| |
200 |
+12.5 +7.0 |
|
Revolution (RPM) |
Tolerance (RPM) |
|
750 |
±100 |
|
2,000 |
±125 |
|
3,000 |
±150 |
|
4,000 |
±150 |
|
5,000 |
±150 |
|
6,000 |
±180 |
|
7,000 |
±210 |
|
Fuel level |
E (Empty) |
1/2 |
F(Full) |
|
Angle of angle |
-40 ° |
0° |
+40 ° |
|
Tolerance |
±2.5° |
± 5° |
±2.5° |
|
Tolerance when assembled with fuel sender |
+0.2° -5.6° |
±10° |
+7.1 ° -0.2° |
|
Resistance (OHM) |
96 |
32.5 |
7 |
|
Temperature (°C) |
50 |
85-110 |
RED ZONE 125- |
|
Angle of angle |
-40° |
-7° |
123° |
|
Tolerance |
| |
+2° -3° |
30±5° |
|
Tolerance when assembled with temperance |
| |
+3° -2° |
+7° -4° |
|
Items |
Specifications |
|
Operating voltage range |
DC6V - DC16V |
|
Operating temperature range |
-30° - +80° |
|
Current consumption |
Max. 150mA (with display illuminated) |
|
|
Max. 150mA (with display illuminated) |
|
Illumination color |
White |
|
Brightness of color |
Reduced to 1/8 when tail switch is turned on. |
|
Headlamp |
W |
Hi, Low : 55 |
|
Front position (side mark) lamp |
W |
8 |
|
Front turn signal lamp |
W |
28 |
|
Tail and stop lamp |
W |
27/8x2, 8 |
|
Turn signal lamp |
W |
21 |
|
Back up lamp |
W |
21 |
|
Luggage compartment lamp |
W |
10 |
|
High mounted stop lamp |
W |
27 or 3, 4 |
|
Map lamp |
W |
8 |
|
License plate lamp |
W |
5 |
|
Turn signal blinking frequency |
Cycle/Min |
85 ± 10 at 12.8V |
|
Hazard warning blinking frequency |
Cycle/Min |
85 ± 10 at 12.8V |
|
Item |
H810 |
H820, H827 |
|
Rated output |
Max. 22w x 2 |
Max. 25w x 4 |
|
Receiving band |
AM/FM-General |
AM/FM |
|
Display system |
LCD |
VFD |
|
Load impedence |
4 OHMx4 |
4 OHMx4 |
|
Normal operating temperature |
-20°+65°C |
-20°+65°C |
|
Dark current |
Max. 2mA |
Max. 2mA |
|
Items |
Specifications |
|
Type |
Telescopic rod |
|
Operating force |
0.3 - 5.5 kg.f |
|
Insulating resistance |
Min, 100M OHM (with DC 500V Megger Tester) |
|
Items |
Specifications |
|
Speed/current at 10kg.cm load test (1.0 Nm, 0.7 lb.ft) |
Low: 44-52 rpm/3.5A or less High: 64-78 rpm/4.5A or less |
|
Speed/current at 40kg.cm load test (3.9 Nm, 2.9 lb.ft) |
Low: 39-47 rpm/5.5A or less High: 56-68 rpm/7A or less |
|
Current when locking |
Low: 22.5A or less High: 27A or less |
|
Items |
Specifications |
|
Arm spring type |
Tension type |
|
Arm pressure (Driver side) |
800 ± 50g or less |
|
Arm pressure (Passenger side) |
600 ± 50g or less |
|
Blade rubber length (Driver side) |
520 mm |
|
Blade rubber length (Passenger side) |
485 mm |
|
Wiping angle (Driver side) |
80.5° ± 1° |
|
Wiping angle (Passenger side) |
93.5° ± 1° |
|
Items |
Specifications |
|
Motor type |
DC ferite magnet type |
|
Pump type |
Centrifugal type |
|
Current |
3.8A |
|
Discharge pressure |
1.2 kg/cm2 or more |
|
Flow rate |
1,320 cc/min. or more |
|
Overload capacity (Continuous operation) With water |
60 sec. or less |
|
Overload capacity (Continuous operation) Without water |
20 sec. or less |
|
Items |
Specifications |
|
Wiper switch |
DC 12V, 4A |
|
Washer switch |
DC 12V, 4A |
|
Operating effort |
0.3 - 0.7 kg.f |
|
Operating temperature range |
-30°C - 80°C |
|
Items |
Specifications |
|
Rated voltage |
DC 12V |
|
Maximum consumption power |
120W |
|
Insulation resistance |
Min. 5MOHM (with DC 500V Megger Tester) |
|
Return time |
13 ± 5 sec. (after pushing the lighter in) |
|
Break temperature of fuse |
138 - 151°C (278.4 -303.4°F) |
|
Items |
Specifications |
|
Type |
Plate |
|
Rated voltage |
DC 12V |
|
Current consumption |
Max. 3.5A (at DC 12V) |
|
Sound level |
110 ± 5dB (at DC 12V) |
|
Operating voltage |
DC 10 - 15V (First sound voltage: 9V) |
|
Operating temperature range |
-40°C - +80°C (-104°F - +176°F) |
|
Insulation resistance |
Min. 1MOHM (with DC 500V Megger Tester) |
|
Fundamental frequency (High pitch) |
430 ± 20 Hz (at DC 12V) |
|
Fundamental frequency (Low pitch) |
370 ± 20 Hz (at DC 12V) |
|
Items |
Specifications |
|
Rated voltage |
DC 12V |
|
Operating voltage range |
DC 9V - 15V |
|
Lock current |
Max. 5A (at DC 12V) |
|
Manual operating force |
3.2 kg.cm (at DC 9V) |
|
Operating temperature |
-30°C - 80°C |
|
Stroke |
21.8mm |
|
Items |
Specifications |
|
Rated voltage |
DC 12V |
|
Operating voltage range |
DC 9V - 15V |
|
Consumption current |
Max. 1A |
|
Items |
Specifications |
|
Rated voltage |
DC 13.5V |
|
Rated currant |
6A or less |
|
Temperature |
-40 - 80°C (-40 - +176°F) |
|
Electrical source (Motor terminal voltage) |
DC 11-15V |
|
Items |
Specifications |
|
Rated voltage |
DC 12V |
|
Range of voltage used |
DC 9 - 15V |
|
Rated load current |
20A |
|
Exciting coil rated current |
Max. 160mA (at 20 ± 5°C) |
|
Voltage drop between terminal |
0.2 V or less |
|
Items |
Specifications |
|
Rated voltage |
DC 12V |
|
Range of voltage used |
DC 9 - 16V |
|
Operating temperature |
-30 - +70°C (-22 - +158°F) |
|
Rated load current |
10A (at DC 13V) |
|
Voltage drop |
0.4V or less |
|
Insulating resistance |
5 M OHM or more (with DC 500V Megger Tester) |
|
Items |
Specifications |
|
Rated voltage |
DC 12V |
|
Rated load current |
10A (at DC 13V) |
|
Voltage drop |
0.3V or less |
|
Operating temperature |
-30 - +70°C (-22 - +158°F) |
|
Operating voltage range |
DC 9 - 16V |
|
Insulating resistance |
1 M OHM or more (with DC 500V Megger Tested) |
|
Items |
Specifications |
|
Operating voltage |
DC 9.5 - 15V |
|
Operating current |
Max. 0.2A |
|
Locked current |
Max. 0.5A |
|
Current consumption |
Max. 1.5A |
|
Operation speed |
3° + 1°/sec |
|
Operating temperature range |
-30 - +80°C (-22 - +176°F) |
|
Items |
Specifications |
|
Rated voltage |
DC 12V |
|
Rated current |
0.2A (Max. 0.5A) |
|
Items |
Specifications |
|
Rated voltage |
DC 12V |
|
Operating voltage range |
DC 9-16V |
|
Operating temperature range |
-30° - +80°C (-22° - +176°F) |
|
Items |
Specifications |
|
Variable intermittent wiper |
DC 12V, 200 mA (Inductance load) |
|
Rear defogger timer |
DC 12V, 200 mA (Inductance load) |
|
Seat belt warning |
DC 12V, 1.2W (Lamp load) |
|
Chime bell |
DC 13.5V, 350 mA (Inductance load) |
|
Items |
Specifications |
|
Rated voltage |
DC 12V |
|
Operating force |
0.3 - 0.7 kg.f |
|
Insulating resistance |
Min. 5MOHM (with DC 500V Megger Tester) |
|
Operating temperature range |
-30°C +80°C |
|
Indicator lamp |
1.2W |
|
Items |
Specifications |
|
Rated voltage |
DC 12V |
|
Power consumption |
200 ± 10% (at DC 12V, 20°C) |
|
Width of line |
Max. 1 mm |
|
Items |
Specifications |
|
Rated voltage |
DC 12V |
|
Operating voltage range |
DC 10 - 18V |
|
Operating temperature range |
-30°C - 80°C (22°F - +176°F) |
|
Rated load |
Max. 1A (A/T solenoid) |
|
|
Max. 0.9A (Key lock solenoid) |
|
Items |
Specifications |
|
Rated voltage |
DC 12V |
|
Rated current |
1A (at DC 12V) |
|
Operating voltage range |
DC 9 - 16V |
|
Operating temperature range |
-30°C - 80°C (22°F - +176°F) |
|
Operating force (Initial pull in force) |
0.4 kg.cm (at 12V, 20°C) |
|
Operating force (Spring force) |
0.2 kg.cm (at 12V, 20°C) |
|
Operating force (Holding force) |
1 kg.cm (at 12V, 20°C) |
|
Items |
Specifications |
|
Operating voltage range |
DC 9 - 16V |
|
Operating temperature range |
-30°C - 80°C (22°F - +176°F) |
|
Exciting current |
Max. 0.9A |
|
Operating force (Pull in force) |
Min. 0.17 kg.cm (at DC 7.5 ± 0.1V) |
|
Operating force (Pull in force) |
Min. 0.25 kg.cm (at DC 6 ± 0.1V) |
|
Items |
Specifications |
|
Rated load |
1A (resistance load, at DC 12V) |
|
Operating force |
0.8 ± 0.2 kg.f |
|
Operating temperature range |
30°C - +80°C (22°F - +176°F) |
|
Items |
Specifications |
|
Rated voltage |
DC 12V |
|
Operating voltage range |
DC 9-16V |
|
Operating temperature range |
-30° - +80°C (-22° - +176°F) |
|
Items |
Specifications |
|
Variable intermittent wiper |
DC 12V, 200 mA (Inductance load) |
|
Rear defogger timer |
DC 12V, 200 mA (Inductance load) |
|
Seat belt warning |
DC 12V, 1.2W (Lamp load) |
|
Chime bell |
DC 13.5V, 350 mA (Inductance load) |
|
Items |
Specifications |
|
Rated voltage |
DC 12V |
|
Operating voltage range |
DC 8-16V |
|
Operating temperature range |
-30° - -95°C |
|
Rated load |
7.5A (lamp load) |
|
Insulation resistance |
Min. 1 M OHM (with 500V Megger Tester) |
|
Dark current |
0 mA (ignition switch OFF) |