SERVICE MANUAL
Applies to:
Hyundai Coupe/Tiburon
1998-2001
GROUP
Body Electrical System
Power Door Locks
Return to Main Menu(s):
Mechanical Manual
Electrical Manual
COMPONENTS
Return to Main Menu(s):
Mechanical Manual
Electrical Manual
CIRCUIT DIAGRAM
Return to Main Menu(s):
Mechanical Manual
Electrical Manual
INSPECTION OF COMPONENTS
Door lock control actuator
Disconnect the actuator connector from the wiring harness.
Apply battery voltage (DC 12 V) to each terminal as shown in the table and confirm that the actuator makes corresponding operation.
Door lock control module
Remove the door lock control module.
Check for continuity between the terminals. If continuity is not as specified, replace the door lock control module.