SERVICE MANUAL | |
Applies to: Hyundai Coupe/Tiburon 1998-2000 | |
GROUP | |
Suspension System | General |
Tool (Number and Name) |
Illustration |
Use |
09221-21000 Camshaft oil seal installer |
|
Removal of the front lower arm ball joint (use wit 09545-11000) |
09529-21000 Wheel alignment gauge attachment |
|
Front wheel alignment for aluminum type wheel |
09532-11600 Pre-load socket |
|
Measurement of the front lower arm ball joint starting torque |
09545-11000 Ball joint remover and installer (A/B) |
|
|
09545-28100 Lower arm bushing arbor |
|
Removal and installation of the front lower arm bushing (use with 09545-34000) |
09545-34000 Lower arm bushing remover and installer |
|
Removal & installation of the front lower arm bushing (use with 09545-28100) |
09546-11000 (J38402) Spring compressor |
|
Compression of the front coil spring |
Tool (Number and Name) |
Illustration |
Use |
09546-21000 Special spanner |
|
|
09568-34000 Ball joint remover |
|
Removal of front lower arm and tie rod end ball joint |
09432-22000 Bushing remover |
|
Removal of rear driling arm bushing and rear axle carrier bushing (use with 09546-21100) |
09546-21000 Bushing installer |
|
Installation of rear suspension arm bushing and rear axle carrier bushing (use with 09221-21000) |
09545-21100 Bushing remover and installer |
|
Installation of rear suspension arm bushing and rear axle carrier bushing (use with 09432-22000, 09552-31000) |
09552-31000 Bushing installer |
|
Installation of rear trailing arm bushing and rear axle carrier bushing (use with 09545-21100) |