SERVICE MANUAL
  Applies to: Hyundai Coupe/Tiburon 1998-2000
GROUP
Transaxle/Transmission Manual Transaxle System
Return to Main Menu(s):      Mechanical Manual      Electrical Manual

COMPONENTS 
Return to Main Menu(s):      Mechanical Manual      Electrical Manual

INSPECTION 
SYNCHRONIZER SLEEVE AND HUB
  1. Install the synchronizer sleeve on the hub and check that they slide smoothly.

  1. Check that the sleeve is free from damage at its inside front and rear ends.

  1. Check for wear of the hub front end (surface in contact with the fifth speed gear).

    CAUTION
    Replace the synchronizer hub and sleeve as a set.
SYNCHRONIZER KEY AND SPRING
  1. Check for wear of the synchronizer key center protrusion.

  1. Check the spring for weakness, deformation and breakage.

Return to Main Menu(s):      Mechanical Manual      Electrical Manual

ASSEMBLY 
  1. Assembly the synchronizer hub, sleeve and key noting their direction.

  1. The synchronizer sleeve has teeth missing at six portions. Assemble the hub to the sleeve so that the center tooth between the two missing teeth will touch the synchronizer key.

  1. Install the synchronizer spring so that its protrusion may be engaged in the groove of the synchronizer key.

    CAUTION
    When installing the synchronizer springs, make sure that the front and rear ones are not faced in same direction.