ELECTRICAL TROUBLESHOOTING MANUAL
  Applies to: Hyundai Coupe/Tiburon 1998-1999
GROUP
Brake Systems Anti-lock Brake System
Return to Main Menu(s):      Mechanical Manual      Electrical Manual


ANTI-LOCK BRAKING SYSTEM MODULATOR
MODULATOR CONNECTOR (M63, HARNESS SIDE)
PIN NO.
 PLUG ASSIGNMENT
 PIN NO.
 PLUG ASSIGNMENT
1
 RIGHT REAR SOLENOID GND
 5
 RIGHT REAR SOLENOID GND
2
 LEFT REAR SOLENOID GND
 6
 LEFT REAR SOLENOID GND
3
 RIGHT FRONT SOLENOID GND
 7
 RIGHT FRONT SOLENOID GND
4
 LEFT FRONT SOLENOID GND
 8
 LEFT FRONT SOLENOID GND

Return to Main Menu(s):      Mechanical Manual      Electrical Manual


RELAY BOX CONNECTOR (M62, HARNESS SIDE)
PIN NO.
 PLUG ASSIGNMENT
 PIN NO.
 PLUG ASSIGNMENT
1
 RIGHT REAR SOLENOID GND
 5
 RIGHT REAR SOLENOID GND
2
 LEFT REAR SOLENOID GND
 6
 LEFT REAR SOLENOID GND
3
 RIGHT FRONT SOLENOID GND
 7
 RIGHT FRONT SOLENOID GND
4
 LEFT FRONT SOLENOID GND
 8
 LEFT FRONT SOLENOID GND

Return to Main Menu(s):      Mechanical Manual      Electrical Manual


INSTALLATION
  1. Follow the reverse order of removal.

  1. Tighten the modulator mounting bolts and brake tube nuts to the specified torque.

    TORQUE SPECIFICATION
    Modulator mounting bolt 17-26 Nm ( 170-260 kg·cm, 12-19 lb·ft )
    Brake tube nut 13-17 Nm ( 130-170 kg·cm, 9-12 lb·ft )
Return to Main Menu(s):      Mechanical Manual      Electrical Manual


COMPONENTS
Return to Main Menu(s):      Mechanical Manual      Electrical Manual


REMOVAL
  1. Push up the power steering fluid reservoir.

  1. Disconnect the ABS Relay box harness, Motor Pump harness and modulator harness located in right front fender.

  1. Disconnect the brake tubes from the ABS modulator to the brake master cylinder and proportioning valve.

  1. Remove the Modulator mounting Bracket and remove the modulator.

    CAUTION
    1. Never attempt to disassemble the ABS modulator.
    2. The modulator must be transported and stored in upright position and with sealed ports.
      The modulator must not be drained.