SERVICE MANUAL
  Applies to: Hyundai Coupe/Tiburon 1998-2001
GROUP
Clutch System Clutch Components
Return to Main Menu(s):      Mechanical Manual      Electrical Manual

COMPONENTS 
Return to Main Menu(s):      Mechanical Manual      Electrical Manual

disassembly 
  1. Disassemble the cotter pin, washer and clevis pin.

  1. Disassemble the clutch pedal mounting bolt.

Return to Main Menu(s):      Mechanical Manual      Electrical Manual

INSTALLATION 
  1. Installation is reverse of removal.

  1. Apply multi-purpose grease to the bushings.

  1. Apply the multi-purpose grease to the clevis pin and washer.

  1. Install the push rod to the clutch pedal.

  1. Adjust the clutch pedal clevis pin play.

Return to Main Menu(s):      Mechanical Manual      Electrical Manual

INSPECTION 
  1. Check the pedal shaft and bushing for wear.

  1. Check the clutch pedal for bending or torsion.

  1. Check the return spring for damage or deterioration.

  1. Check the pedal pad for damage or wear.

CHECK IGNITION LOCK SWITCH

Remove the ignition lock switch and check continuity between the terminals. If the continuity is not as specified, replace the switch.