Comments: Great write-up on the 24CDI Diverter valve which gave me the confidence to do it myself. All in, it took me about 2 hours to replace and now the boiler is working propery again. Thanks, James.
Added: August 4, 2009
Submitted by Name: ndor From: West Africa
Comments: thx for sharing information on evo's mechanical and electrical systems
Added: July 1, 2009
Submitted by Name: Brad From: USA
Comments: Thanks for the Tiburon sunroof relay part number. Now if I only new where to get one cheaper than from the dealer....
Comments: i've been spending too much time looking for some free web to help me on my hyundai troubleshooting. thanks to you and your contribution to the web mate! bless u more
Comments: Thanks for the invaluable information regarding the diverter diaphragm replacement. Job successfully completed (up to now). I am a complete novice and if I can do it, anyone can (with your information). Thanks again.
Comments: Thanks for the manual to change timing belt on my coupe!
Added: April 8, 2009
Submitted by Name: susy
Comments: do i need planning permission to brick a back door up
Admin reply: You don't normally require planning permission to block up an opening though it is always worth checking with your local council as there can be regional variations and particulars which may apply depending on your circumstances. ...Mathew.
Comments: Outstanding website, saved myself a fortune when my hyundai coupe manifold had a crack in it and when my blowers weren't blowing hot air. Not been mechanically minded i took it to a garage. The garage quoted me £700, i spent £3 on some exhaust fixing paste which sealed the crack up perfectly and £1 on some blue tak to hold the temperature control lever in place. The clear detailed drawings helped me remove the console panels, locate the heater matrix and not kill the car in the process. Nice one.
Comments: Interesting site - esp the article on changing the diaphragm on a Worcester Bosch Boiler. I paid a plumber £258 yesterday (£102 for part+VAT+labour) to change mine - of course he supplied a whole new valve - such a waste when you see a lovely big brass valve that is in perfect condition all replaced for the sake of a perished rubber diaphragm. But I was in no position to argue that he just replaced the rubber bit - we were left with no hot water from Xmas Eve til yesterday (30th Dec) so we were desperate!!!
Name: James
From: Watford
Great write-up on the 24CDI Diverter valve which gave me the confidence to do it myself. All in, it took me about 2 hours to replace and now the boiler is working propery again. Thanks, James.